User's Manual

COMPANY CONFIDENTIAL

1. Introduction

Project Name: Marvell 88W8787 WLAN/BT Combo Card

Project Number: M26H002

This documentation describes the engineering requirements specification of 88W8787

(WLAN+BT) combo Card. It is a confidential document of Foxconn.

1.1 Scope

This combo design is based on the Marvell 8787 single-chip solution. It’s operating in

2.4GHz, compatible with the IEEE 802.11b/g/n standard and Bluetooth BT2.1+EDR

standard. The 802.11n data rate provides for MCS0 to MCS7 (HT20,HT40). The 802.11g

data rate provides for 54, 48, 36, 24, 18, 12, 9, 6Mbps, and 802.11b data rate provides for

11, 5.5, 2, 1Mbps. In addition, it’s also compatible with BT2.1+EDR. This combo card has

implemented some efficient mechanisms in its software and hardware to maximize the

performance of WLAN and BT.

1.2 Feature

 Marvell 88W8787 combo card with B2B connector

 Compatible with IEEE 802.11b/g/n standard

 Compatible with BT2.1+EDR standard，also compatible with BTv3.0+HS

 Two U.FL RF connectors (one for WiFi, the other one for BT)

 Support 11n HT20/HT40 mode

 WLAN/BT data transactions are handled over SDIO interface

 Support Wireless multimedia enhancements quality of service support (QoS)

 Support WEP,TKIP, and AES hardware encryption

 GP compliance