User's Manual

82 83
System Conguration
System Conguration
Volume Bar
The bars will change color if the
microphone picks up sound.
Microphone
Green when tapped
Date & Time
1
Tap the setting you would like to adjust.
2
Tap or to adjust the date or
time, then tap OK.
Some applications use the date and time, so it is
important to set this correctly.
Touch Screen
Use the following procedure if the Touch Screen doesn’t seem to respond properly to the stylus.
1
Tap with the tip of the stylus.
It is important to tap each
accurately, in all three locations, to correctly
calibrate the Touch Screen. If you have done so, calibration will be com-
pleted and Calibrated will be displayed.
2
Tap in four places to check calibration.
The
icon will turn green if you can accurately tap it.
If you cannot accurately tap the icon, tap Repeat to try
the calibration process again.
3D Screen Check
If you are having diculty seeing 3D images, slide the 3D depth slider all the way to the top and then follow the on-screen
instructions.
Sound
Tap the setting you would like to use for the system sound, then tap OK.
If you are having diculty selecting with the stylus...
Turn the power on while holding down the L Button, R Button, and X Button. This will automatically start the Touch Screen
calibration procedure.
Mic Test
Speak into the microphone to test its operation. The volume bar in the microphone will change color if it’s working correctly.
Tap Finish when the test is complete.
While holding,
press
Other Settings
Other Settings