User's Manual

Foxconn Bluetooth Module User Manual
-4-
1. Overview
1.1 Setup PC
Bluetooth module development is necessary to setup your PC. Broadcom Bluetool and Active Peal must be installed
your PC. Two USB Drivers must be Installed your PC. This documentation is the support guide for starting your
development.
1.2 Writing firmware
Bluetooth module must be written the firmware. This documentation is the support guide for writing the firmware.
2. Install the Applications
2.1 Applications
ActivePerl 5.8.4.810 only
Bluetool 0.9.4.3 (or higher revision)
2.2 Installation
First, install ActivePerl at your PC. Select default state. Second, install Bluetool. Select default state.
Notice: If first install Bluetool, uninstall Bluetool. Try again.
3. Plug-in Bluetooth Module