J20H086 User Manual Technology Approval Sheet Rev. Foxconn Part No. Sony Part No. Prepared by WLAN Module 1.
CONTENTS 1 REVISION HISTORY ........................................................................ 3 2 PRODUCT OVERVIEW ........................................................................ 4 2.1 3 SCOPE ........................................................................ 4 MODULE HARDWARE OVERVIEW ................................................................ 5 3.1 3.2 3.3 4 APPLICATION FEATURES ...............................................................................
1 Revision History Date Document revision 2014/05/27 1.
2 Product Overview The J20H086 802.11a/b/g/n 2X2 and BT4.0+LE module provides wireless modem functionality utilizing direct sequence spread spectrum and OFDM/CCK technology. This module is based on MTK MT7662U solution .It fully complies with IEEE 802.11n,IEEE 802.11 a/b/g, Bluetooth v2.1+EDR, V4.0 standard, offering feature-rich wireless connectivity at high standards, and delivering reliable, cost-effective throughput from an extended distance.
3 Module Hardware Overview 3.1 Features ♦ ♦ ♦ ♦ ♦ ♦ IEEE802.11a/b/g/n/ac (2X2) based on MTK MT7662U solution. Support BT4.0+LE USB 2.0 Interface, High and Full Speeds supported. Module is powered by the host with a 3.3V +/- 5% supply. External PCB printed antennas. 4 layers through hole PCB design with FR4 material 3.
8 9 10 11 12 13 14 15 S1 S2 DM DP GND VSYNC GND GND VCC VCC I/O I/O Input PWR PWR 6 USB_DATAUSB_DATA+ Shield Ground 3D Video sync Signal Ground Ground DC 3.3V DC 3.
3.3 PCB Assembly Dimension Dimension (W x Lx H ): 80mmx25mmx1.
4 Regulatory Industry Canada statement: This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence.
End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: “Contains IC: 2878D-J20H086”.
minimum distance 20cm between the radiator & your body. This device is intended only for OEM integrators under the following conditions: 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required.
equipment operating in the 2,4 GHz ISM band and using spread spectrum modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive EN 301 489‐1 V1.8.1: 2008 Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements EN 301 489‐17 V2.1.