J20H066 Bluetooth Module User Manual Revision History Date 2012/07/09 Revision 0.
Content 1. PRODUCT OVERVIEW........................................................................................................................................3 2. INTERFACE PIN DEFINE....................................................................................................................................4 2.1 ANALOG AUDIO I/F MODULE PIN DEFINE .............................................................................................................4 2.
1.Product overview This documentation outlines the Bluetooth Module. It is designed for Bluetooth 2.4GHz systems. The module provides a fully compliant Bluetooth v2.1/ v3.0+ EDR specification system for data and voice. And it support below function: 1. Bluetooth 1.1 Operating Frequency: 2402MHz ~ 2480 MHz 1.2 Carrier Spacing: 1.0MHz 1.3 Duplexing: TDD 1.4 Modulation: FHSS GFSK BT=0.5, π/4-DQPSK, 8DPSK 1.5 Symbol Rate: 1Mbps (GFSK), 2Mbps (π/4-DQPSK), 3Mbps (8DPSK) 2.
2. Interface Pin define This module has 2 different signal interfaces for supporting analog signal and digital signal. Figure 2: Key component is shown as below marks 2.1 Analog Audio I/F module pin define Pin NO.
2.2 Digital Audio I/F module pin define Pin NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Pin Type I Power I O I O O O O O - Description Ground BT_RST BT_VDD33 URT_CTS URT_RTS URT_RX URT_TX MUTE Ground Ground PCM_SYNC PCM_CLK PCM_OUT Ground Remark B_J3 B_J3 B_J3 B_J3 B_J3 B_J3 B_J3 B_J3 B_J3 B_J3 B_J3 B_J3 B_J3 B_J3 3. Electrical Specification 3.1 Absolute Maximum Rating Symbol Condition Min. Typ. VDD33 Operating Temperature Storage Temperature VDD33 Respect to GND --- 3.0 -10 -40 3.3 25 25 Max . 3.
Test Station PT 140kHz ≤ Δf1avg ≤ 175kHz Δf2max ≥ 115kHz Δf2avg/Δf1avg ≥ 0.8(80%) Modulation Characteristics Test Channel 0 Maximum Input Power Channel 0, 39, 78 (BER<0.
4. Bluetooth tool Utility and install @ Window XP 4.1 Install Bluesuite tool 4.
4.3 Set Protocol 4.
4.
