User's Manual

COMPANY CONFIDENTIAL
4
1. Introduction
Project Name: 88W8787 WiFi(11b/g/n)/BT combo
Project Number: J20H045.00
This documentation describes the engineering requirements specification of 88W8787
(WLAN+BT) combo Card. It is a confidential document of Foxconn.
1.1 Scope
The J20H045.00 combo design is based on the Marvell 8787 single-chip solution. It’s
operating in 2.4GHz, compatible with the IEEE 802.11b/g/n standard and Bluetooth
BTv3.0+HS standard. The 802.11n data rate provides for MCS0 to MCS7 (HT20,HT40).
The 802.11g data rate provides for 54, 48, 36, 24, 18, 12, 9, 6Mbps, and 802.11b data
rate provides for 11, 5.5, 2, 1Mbps. In addition, it’s also compatible with BTv2.1+EDR.
This combo card has implemented some efficient mechanisms in its software and
hardware to maximize the performance of WLAN and BT.
1.2 Feature
 Marvell 88W8787 combo card with B2B connector
 Compatible with IEEE 802.11b/g/n standard
 Compatible with BT v3.0 + HS standard，also compatible with BTv2.1+EDR
 Three U.FL RF connector (two for WiFi, one for BT)
 Support 11n HT20/HT40 mode
 WLAN/BT data transactions are handled over SDIO interface
 Support Wireless multimedia enhancements quality of service support (QoS)
 Support WEP,TKIP, and AES hardware encryption
 ROHS compliance