User Manual

Wireless Mode Setting
The wireless Mode settings allow the user to specify which wireless frequency and data rate the wireless
network is operating at. If all selections are chosen, the Wireless Access Point Module will
automatically search all frequencies and data rates for wireless networks that match up to the profile
settings.
Wireless Mode when starting Ad-Hoc setting
The “Wireless Mode when starting ad-hoc setting” allows the user to determine the type of ad-hoc
network to be started. Note: This setting will only take effect if there are no other ad-hoc networks with
the same SSID currently operating within range. If existing ad-hoc networks with the same SSID are
currently operating, then the Wireless Access Point Module will connect using the frequency and data
rate provided by the exiting ad-hoc network.
4-4 Diagnostic Tab
The diagnostic TAB displays the current data statistics for both receive and transmit. Additional
statistics and driver information can be displayed using the appropriate labeled buttons.
Figure 4-14