User Manual

Setting LEAP authentication
LEAP authentication is a part of CCX compatibility and allows you to configure the Wireless Access
Point Module to match the work with a Wireless LAN that incorporates LEAP authentication. This
mode should only be used if your Wireless LAN requires LEAP authentication.
To configure the LEAP settings for a particular profile select LEAP in the security mode and click on
the Define LEAP settings button to configure the settings described below.
• Username – The username that is used to log in to the LEAP network
• Password – The password used to log in to the LEAP network. This password is encrypted
using the same encryption as the encryption keys.
Figure 4-11