User Manual

security mode is chosen the button next to the selection will enable you to include any
additional information required by that security mode.
4-3-2 Security Settings in Profile Management
The Security Tab allows you to configure the Wireless Access Point Module to match the security
settings of the Wireless LAN network.
Select the appropriate security mode…
•
Pre-Shared Keys
– This mode is commonly referred to as WEP encryption, and allows for
setting of all four WEP keys. The pre-shared key selection also allows for setting of a unique
key, which is used with higher forms of encryption such as AES.
•
LEAP
– This is CCX compliant feature that allows for authentication with Cisco access points.
This mode should only be used if your Wireless LAN requires LEAP authentication
•
Externally Managed 802.1X Keys
– This security mode allows for dynamic switching of
encryption keys using 802.1X authentication. This mode should only be used if your Wireless
LAN requires 802.1X authentication.
•
Disabled
– Use this mode when there is no security authentication or encryption is currently
enabled on your Wireless LAN network.
Figure 4-9