User's Manual

J20H018
802.11b/g WLAN Module User Guide
Doc. No. MV-S800245-00 Rev. C
CONFIDENTIAL
Copyright © 2005 Foxconn
Page 46 Document Classification: Proprietary May 26, 2005, 2.00
3.5.2 Advanced Tab—Protocol
This section of the Advanced tab sets the Protocol options:
Figure 46: Protocol Window
Table 13: Advanced Tab Protocol Window Description
Fields Description
Power Save Mode Sets the power mode:
• Continuous Access
• Max Power Save
Preamble (802.11b) Sets the radio preamble (takes effect only when attaching to 802.11b
networks):
• Auto
• Short
• Long
Receive Antenna Sets the Receive Antenna mode, either:
• Diversity On
• Diversity Off
•
Transmit Antenna
Fixed at Antenna 2
Transmit Power Sets the power mode:
•Auto
•High
•Medium
• Low
Transmit Rate Data transmit rate
The range of the data rate depends on the type of AP that the client card is
connected to. The default setting is Auto.
Fragment Threshold Sets the fragmentation threshold (i.e., the size that packets are fragmented
into for transmission). The default setting is 2346.
RTS/CTS Threshold Sets the packet size at which the AP issues a RTS (or CTS) frame before
sending the packet. The default setting is 2347.