User's Manual

CB-35P/MB-35P
Wireless Adapter User Guide
Doc. No. MV-S800245-00 Rev. C
CONFIDENTIAL
Copyright © 2005 Foxconn
Page 40 Document Classification: Proprietary May 26, 2005, 2.00
3.3.1 Site Survey—Access Point Filter
This section is used to customize which sites are displayed in the Site Survey list window:
• Display Peer-To-Peer stations—checking this box displays all of the peer-to-peer stations within range.
• Display 802.11a Access Points—disabled (not supported in CB-35P/MB-35P).
• Display 802.11g Access Points—checking this box displays all of the 802.11g APs within range.
• Display 802.11b Access Points—checking this box displays all of the 802.11b APs within range.
3.3.2 Site Survey—List Window
This window reports information on the Ad-Hoc or AP stations detected:
Figure 40: Site Survey List Window
Table 10: Site Survey List Window Description
Fields Description
Network SSID Network SSID label; i.e., the Network Name. The Network Name is a text string.
MAC Address MAC address, a hardware address that uniquely identifies each node of a network.
Security Security enabled or disabled
CH Channel used by the detected device
WMM Wireless Multimedia Enhancements (WMM) supported by the detected device.
Signal Signal strength of the detected device as a percentage
Icons The following icons may be displayed on the left side of the Network SSID column:
• An antenna icon with a superscript b indicates an 802.11b AP.
• An antenna icon with a superscript g indicates an 802.11g AP.
• A circle around the icon means the adapter is connected to this network.
• A slash icon indicate an Ad-Hoc network.