User's Manual

J20H018
802.11b/g WLAN Module User Guide
Doc. No. MV-S800245-00 Rev. C
CONFIDENTIAL
Copyright © 2005 Foxconn
Page 34 Document Classification: Proprietary May 26, 2005, 2.00
3.2.2.2.4 WPA/WPA2 EAP/LEAP
To connect to an AP through the Radius Server, select WPA/WPA2 as the Authentication Mode, Light EAP (LEAP)
as the 802.1x Authentication Protocol, and TKIP as the Encryption Method for WPA LEAP or AES as the
Encryption Method for WPA2 LEAP.
Figure 31: WPA/WPA2 EAP/LEAP Authentication
Clicking on the Configure WPA Radius button configures the security settings displays the WPA LEAP Radius
Configuration Window. Enter all the required information. Click OK button to set the configuration.
Figure 32: WPA/WPA2 EAP/LEAP Radius Configuration