User's Manual

J20H018
802.11b/g WLAN Module User Guide
Doc. No. MV-S800245-00 Rev. C
CONFIDENTIAL
Copyright © 2005 Foxconn
Page 32 Document Classification: Proprietary May 26, 2005, 2.00
3.2.2.2.3 802.1x/WPA/WPA2 PEAP Support in Infrastructure Mode
To connect to an AP through the Radius Server, select 802.1x/WPA/WPA2 as the Authentication Mode, Protected
EAP (PEAP) as the Authentication Protocol, and AES or TKIP as the Encryption Method.
Figure 29: 802.1x/WPA/WPA2 PEAP Authentication
Clicking on the Configure WPA Radius button displays the WPA PEAP Radius Configuration window. Enter all of
the required information. Click OK button to set the configuration.
Figure 30: 802.1x/WPA/WPA2 PEAP Radius Configuration