User's Manual

Configuration Utility User Interface
Profile Manager Tab
Copyright © 2005 Foxconn
CONFIDENTIAL
Doc. No. MV-S800245-00 Rev. C
May 26, 2005, 2.00 Document Classification: Proprietary Page 29
3.2.2.2.1 WPA-PSK/WPA2-PSK Support
In Infrastructure Mode, if WPA-PSK/WPA2-PSK is selected as the Authentication Mode, either TKIP or AES is
selected as the Encryption Method.
Figure 23: WPA-PSK/WPA2-PSK Authentication
Figure 24: WPA-PSK/WPA2-PSK with TKIP
•
Enter the network passphrase in the “Passphrase” and “Confirm” fields.
• WPA-PSK/WPA2-PSK is not supported in Ad-Hoc network mode.
3.2.2.2.2 802.1x/WPA/WPA2 EAP-TLS Support
If 802.1x/WPA/WPA2 is selected, AES or TKIP encryption is available, and a certificate is required for the
authentication.
1. To connect to an AP through the Radius Server, select 802.1x/WPA/WPA2 as the Authentication Mode.
2. Select WEP, TKIP, or AES as the Encryption Method.
3. Select EAP/TLS (Use Certificate) as the 802.1x Authentication Protocol.