User's Manual

Configuration Utility User Interface
Profile Manager Tab
Copyright © 2005 Foxconn
CONFIDENTIAL
Doc. No. MV-S800245-00 Rev. C
May 26, 2005, 2.00 Document Classification: Proprietary Page 27
Note
Prefer Channel and Wireless Mode are used only when an Ad-Hoc network is started by the client card.
These two attributes are ignored if the client card is connected to an existing Ad-Hoc network with the
same desired SSID.
Table 4: Network Info Description
Fields Description
Profile Name Profile name
Network SSID Network SSID label
Network Type
Infrastructure: When an Infrastructure network is selected, the Profile Setting
displays the Wireless Mode field.
Ad-Hoc: When an Ad-Hoc network is selected, the Profile Setting displays an
additional Prefer Channel field.
Wireless Mode Auto: Connects to either 802.11g network or 802.11b network (Infrastructure
network only).
802.11g: Connects to either 802.11g or 802.11b network (Ad-Hoc network
only).
802.11b: Connects to 802.11b network only (Available in both Infrastructure
and Ad-Hoc networks).
Prefer Channel Channel being used (Ad-Hoc network only)