User's Manual

Configuration Utility User Interface

Profile Manager Tab

CONFIDENTIAL

Doc. No. MV-S800245-00 Rev. C

May 26, 2005, 2.00 Document Classification: Proprietary Page 25

3.2 Profile Manager Tab

Clicking on the Profile Manager tab displays the Profile Manager dialog box. The Profile Manager displays the

profiles available and allows you to create, modify, and delete profiles:

Figure 19: Profile Manager Window

Note

The Profile Manager window is not accessible when Zero Configuration is enabled.

PROFILE MANAGER—PROFILE LIST WINDOW

The window on the left side of this tab lists all of the profiles available. Highlighting a profile selects it. If the Default

box next to the profile is checked, that profile is used in auto-configuration mode when the link is lost. If it is

unchecked, that profile is excluded in auto-configuration. The controls associated with this window are:

Table 3: Profile List Window Description

Fields Description

Apply Profile Applies the profile selected or user call

Apply the profile by double-clicking on the desired profile.

Move Up / Move Down Moves the profile up and down in the window

All profiles with the Network Type set to Infrastructure are displayed before the

profiles with the Network Type set to Ad-Hoc. In auto-configuration mode, the

checked priorities at the top of the list have higher priority than checked

profiles at the bottom of the list.

Delete Deletes a profile

Create Creates a profile

Save Saves changes made to a selected profile