User's Manual

Configuration Utility Overview
AutoLink
Copyright © 2005 Foxconn
CONFIDENTIAL
Doc. No. MV-S800245-00 Rev. C
May 26, 2005, 2.00 Document Classification: Proprietary Page 17
6. Relaunch Configuration Utility.
7. Click “Advanced” tab.
8. Check "Radio Off" below the Miscellaneous box in the utility.
Figure 7: AutoLink AP Configuration—Radio Off
9. Move the Foxconn AP close to the PC and turn the AP power on.
10. An AutoLink dialog box opens immediatetly. If not, click the AP power off and on again.
Figure 8: AutoLink AP Configuration—Security Pin
11. Enter the security PIN number. Click Apply. It takes a few seconds for the AutoLink AP configuration. After
configuration completed, the AutoLink AP restarts automatically.