User's Manual

J20H018
802.11b/g WLAN Module User Guide
Doc. No. MV-S800245-00 Rev. C
CONFIDENTIAL
Copyright © 2005 Foxconn
Page 16 Document Classification: Proprietary May 26, 2005, 2.00
2.4 AutoLink
AutoLink is a feature integrated in Foxconn wireless client cards that offers users a simple way to configure a new
Foxconn AP in conjunction with the Configuration Utility. The AutoLink dialog box pops up automatically when a
non-configured Foxconn AP or an AutoLink configured Foxconn AP appears in the area of a client card that is not
connected to an AP or Ad-Hoc network.
AutoLink operations include:
• Configure an AutoLink AP—first time use, AutoLink AP, or renew an AP Configuration
• Create connection with AutoLink AP—new Foxconn client card connecting to an AutoLink AP
2.4.1 Configure an AutoLink AP
Equipment needed to configure an AutoLink AP:
• Foxconn AutoLink AP (i.e., AP-32)
• Foxconn Wireless Client Card (J20H018) and software package (in CD or storage device)
• Laptop PC or Desktop PC with a Microsoft Windows XP, 2000, ME or 98SE operating system
To start or renew an AutoLink AP, configure an AP and create a connection profile for the client card in a secure
wireless network:
1. Install Foxconn Wireless Client Card (J20H018) on PC.
2. Launch Configuration Utility.
3. Click "Advanced" tab.
4. Uncheck "Auto connect …"
5. Check "Enable Auto Link". Click OK button.
Figure 6: AutoLink AP Configuration
Note
Refer to the AP User Guide for the instructions to reset AP configuration to default.