User's Manual

Configuration Utility Overview
Windows XP Users
Copyright © 2005 Foxconn
CONFIDENTIAL
Doc. No. MV-S800245-00 Rev. C
May 26, 2005, 2.00 Document Classification: Proprietary Page 13
2.2.1.1 Configuration Utility Tabs
When Zero Configuration is enabled, the Foxconn Configuration Utility enters Monitor mode. When in Monitor
mode, the Foxconn Configuration Utility has the following properties:
• Limited tab display (Network Status, Statistics, About, and Readme tabs)
• Information reporting only (the Utility cannot be used to configure the card)
Figure 2: Foxconn Configuration Utility in Active Mode
When Zero Configuration is disabled, all tabs available through the Foxconn Configuration Utility are active, as
shown in Figure 2.
Figure 3: Zero Configuration Disabled Window