User's Manual

Configuration Utility Overview

Overview

CONFIDENTIAL

Doc. No. MV-S800245-00 Rev. C

May 26, 2005, 2.00 Document Classification: Proprietary Page 11

Section 2. Configuration Utility Overview

2.1 Overview

The Foxconn Wireless Module Configuration Utility is a Microsoft

Windows

application that allows configuration

and management of Foxconn J20H018 client cards. The Configuration Utility sets up profiles and performs

wireless network management tasks.

See the J20H018 Installation Guide for information on installing the Configuration Utility.

2.2 Windows XP Users

For Windows XP, use either the Zero Configuration Utility or the Foxconn Configuration Utility to configure the

cards. Both utilities cannot be used at the same time. Selection is made during installation of the card or can be

switched during normal operation.

Notes

• Zero Configuration can be disabled when running the setup program for the Foxconn Client

Configuration Utility. See the Installation Guide for more information on selections made during

installation of the Utility.

• When using the Marvell Configuration Utility on Windows XP, Foxconn recommends turning off the

Windows wireless configuration feature. For information on how to disable this feature, refer to

Windows documentation.