User's Manual

8–12 Hardware Guide
Hardware Upgrades
DRAFT - Revised: 10-28-02
Compaq CONFIDENTIAL—For Internal Use Only
11/13/02
File: SP-CH8-Hardware Upgrades.fm
8. Remove the existing memory board:
a. Pull away the retention clips on each side of the board 1.
(The board tilts upward.)
b. Lift the edge of the memory expansion board, then gently
pull it out of the slot 2.
Removing the existing memory board
✎
To protect a memory board after it has been removed, place it in
an static-safe container.