User's Manual

8–6 Hardware Guide
Hardware Upgrades
DRAFT - Revised: 10-28-02
Compaq CONFIDENTIAL—For Internal Use Only
11/13/02
File: SP-CH8-Hardware Upgrades.fm
Adding and Upgrading Memory Boards
Å
WARNING: The memory compartments are the only
user-accessible internal compartments on the notebook. All other
areas that require a tool to access should be opened only by an
authorized service provider.
Å
WARNING: Failure to unplug the power cord and remove all battery
packs before installing a memory expansion board can damage the
equipment and expose you to the risk of electrical shock.
Ä
CAUTION: Electrostatic discharge (ESD) can damage electronic
components. Before beginning any procedure, ensure that you are
discharged of static electyricity by touching a grounded metal
object. For more information, refer on this CD to the Regulatory and
Safety Notices guide.
The notebook has 2 memory slots. The primary memory slot is
located under the keyboard. The primary memory slot is
populated at the factory. The memory expansion slot is located on
the bottom of the notebook.
The memory capacity of the notebook can be upgraded first by
adding a memory board to the expansion slot and then by
upgrading the memory board in the primary memory slot.
Adding a Memory Expansion Board
To add a memory expansion board:
1. Shut down the notebook. (If you are not sure whether the
notebook is off or in Hibernation, turn the notebook on by
pressing the power/standby button. Then shut down the
notebook through the operating system.)
2. Disconnect all external devices connected to the notebook.
3. Disconnect the power cord.