User's Manual

12 Notes
Write a note
1. Tap Start > Programs > Notes.
NOTE: Writing must be selected as the default input mode.
2. Tap New.
3. Write your text on the screen.
4. Tap ok to return to the note list.
To select the handwritten text, tap and hold next to the writing. As soon as dots appear and before they
form a complete circle, quickly drag across the writing.
If the writing crosses three ruled lines, it is treated as a drawing rather than text.
Create a copy of a note
To create a copy of a note:
1. Tap Start > Programs > Notes.
2. Tap the note you want to copy.
3. Select the text on the screen, and then tap Menu > Copy.
4. Open the required note from the note list or a new note to which the selected content is to be copied.
5. Tap Menu > Paste.
If you paste the contents in a new note, a copy of the note displays in the note list.
Create a voice note
To create a stand-alone recording (voice note) or add a recording to a note:
1. Tap Start > Programs > Notes.
2. Do one of the following:
●
To create a stand-alone recording, record from the note list.
●
To add a recording to a note, create or open a note.
NOTE: If the Recording toolbar does not appear, tap Menu > View Recording Toolbar.
3.
Tap the
(Record) button.
4. Speak into the microphone located at the bottom of the unit.
5.
When finished recording the note, tap the
(Stop) button on the Recording Toolbar.
6. Tap ok to return to the note list.
54 Chapter 12 Notes