User's Manual
Table Of Contents
- Register the Travel Companion
- Box contents
- Components
- Learn the basics
- Status icons
- Enter owner information
- Perform a soft reset
- Perform a factory reset
- Lock and unlock the Travel Companion
- Adjust the volume
- Change power management settings
- Dim or adjust the brightness of the backlight
- Change the device name
- Set alarms
- Obtain services for a cracked or damaged screen
- Protect the Travel Companion screen from cracking or damage
- Battery saving tips
- Check the battery charge level
- Navigation Quick Start
- Enter text
- Connections
- Bluetooth terms
- Work with Bluetooth Manager
- Bluetooth Phone Manager
- Connect to a computer via Bluetooth
- Bluetooth device profiles
- Create, end, and accept a Bluetooth partnership
- Rename a Bluetooth partnership
- Make a device discoverable
- Open Bluetooth settings
- Set up an incoming or outgoing Bluetooth Serial (COM) port
- Entertainment
- Contacts
- Calculator
- Internet Explorer Mobile
- Storage cards
- Product specifications
- Regulatory notices
- Frequently asked questions
- Guidelines for care and maintenance
Equipment Warning
WARNING! To reduce the risk of personal injury, electrical shock, fire or damage to the equipment:
Plug the AC adapter into an AC outlet that is easily accessible at all times.
Disconnect power from the equipment by unplugging the AC adapter from the AC outlet or unplugging
the synchronization cable from the host computer.
Do not place anything on the power cord or any of the other cables. Arrange them so that no one may
accidentally step on or trip over them.
Do not pull on a cord or cable. When unplugging from the electrical outlet, grasp the cord by the plug
or, in the case of the AC adapter, grasp the AC adapter and pull out from the electrical outlet.
Do not use converter kits sold for appliances to power your HP iPAQ.
Acoustics Warning
WARNING! Listening to this device at high volume levels and for extended durations may damage
one’s hearing. In order to reduce the risk of damage to hearing, one should lower the volume to a safe,
comfortable level, and reduce the amount of time listening at high levels.
●
For your own safety, before using headsets or earphones, always reset the volume. Some
headphones are louder than other headphones, even if the volume control setting is the same.
●
Changing the default audio or equalizer settings might lead to higher volume and should only be
done with caution.
●
Headsets or earphones used with this device should comply with the headphone limits in EN
50332-2.
28 Chapter 14 Regulatory notices