User's Manual
Table Of Contents
- Register the Travel Companion
- Box contents
- Components
- Learn the basics
- Status icons
- Enter owner information
- Perform a soft reset
- Perform a factory reset
- Lock and unlock the Travel Companion
- Adjust the volume
- Change power management settings
- Dim or adjust the brightness of the backlight
- Change the device name
- Set alarms
- Obtain services for a cracked or damaged screen
- Protect the Travel Companion screen from cracking or damage
- Battery saving tips
- Check the battery charge level
- Navigation Quick Start
- Enter text
- Connections
- Bluetooth terms
- Work with Bluetooth Manager
- Bluetooth Phone Manager
- Connect to a computer via Bluetooth
- Bluetooth device profiles
- Create, end, and accept a Bluetooth partnership
- Rename a Bluetooth partnership
- Make a device discoverable
- Open Bluetooth settings
- Set up an incoming or outgoing Bluetooth Serial (COM) port
- Entertainment
- Contacts
- Calculator
- Internet Explorer Mobile
- Storage cards
- Product specifications
- Regulatory notices
- Frequently asked questions
- Guidelines for care and maintenance
CAUTION: To avoid damaging the Travel Companion or the AC adapter, make sure all connectors
are properly aligned before connecting.
The battery provides power for the Travel Companion to operate. Travel Companion comes with a
mini-USB synchronization cable, which must be used to charge the device.
It takes approximately 2–4 hours to fully charge the battery for the first time. Subsequent charges might
take longer.
1. Insert the USB end of the mini-USB synchronization cable into the port on the AC adapter.
2. Connect the AC adapter to an electrical outlet.
3. Connect the mini-USB synchronization cable to the charging/communications port on the Travel
Companion. The cable connector fits only one way. If the connector does not insert easily, turn it
over.
TIP: You can also charge the battery by connecting the Travel Companion to a USB port on your
computer using the mini-USB synchronization cable.
NOTE: Whenever a replacement battery is inserted into the Travel Companion, press the
Power key for at least two seconds. In case the device does not turn on, attach the AC adapter to
turn on the Travel Companion.
Power on the Travel Companion
The first time you turn on the Travel Companion, follow the on-screen set up instructions.
To turn on the Travel Companion:
●
Press the and hold the Power key.
●
Follow the on-screen instructions to set up the Travel Companion.
Car Kit setup
The car kit allows you to mount the Travel Companion in a location in your car that provides the best
access to a GPS signal.
Il kit per auto consente di posizionare il Travel Companion all'interno del veicolo nel punto che assicura
la migliore ricezione del segnale GPS.
To install the car kit:
1. Plug the power cable into the Travel Power Adapter, and then plug the adapter into a vehicle power
outlet.
2. Attach the power cable to the clips on the back of the Travel Companion holder. Be sure to leave
enough cable to plug into the Travel Companion, and that the connector is turned the correct way
to plug into the unit.
PLACEHOLDER FOR GRAPHIC
3. Install the holder onto the windshield mounting bracket.
PLACEHOLDER FOR GRAPHIC
4. Place the car kit assembly onto the windshield (1), and then press the locking lever (2) to securely
mount the assembly into place.
PLACEHOLDER FOR GRAPHIC
Car Kit setup 11