User's Manual

GPE810U
Confidential Page 5
4.2.1 Select “Ethernet” as WAN
Use DHCP Mode to get IP address automatically
A. Set Primary WAN type as “Ethernet”
B. Set Ethernet IP Type under Ethernet Settings as “DHCP”
C. Press Apply button
 Secondary WAN will be used when Primary WAN is dead.
4.2.3 Use static IP Mode
A. Set Primary WAN type as “Ethernet”
B. Set Ethernet IP Type under Ethernet Settings as “Static”
C. Configure proper settings in IP address / Netmask / Gateway / Primary DNS /
Secondary DNS under Static IP Settings
D. Press Apply button
 “NTP” is for users able to setup five NTP server maxmum. GW will query NTP server from the first one
until GW get the response from NTP server.
 “LRR log” can upload / export LRR TRACE.log from GW to local user space.