User's Manual

GPE810U
Confidential Page 3
4.Software setup
4.1Use web interface to setup LoRa Indoor GW under Ethernet deployment mode
4.1.1 Power up Indoor LoRa GW
4.1.2 Set PC/NB ether port IPv4 setting in user PC statically for example, 192.168.127.100.
4.1.3 Use PC/NB ether port connect to the Indoor LoRa GW Ethernet port, and then open a
browser to Indoor LoRa GW’s IP (192.168.127.250) to access its web interface. The login
information is like:
Username: bsconfig
Password: aup6g/t;3
Use the hidden webpage to enable Telnet or SSH service on Indoor GW.
http://192.168.127.250/hiddenpage.html
Username : foxcconfig
Password : cj/6c93!
4.1.4 Required a web browser
Chrome version “55.0.2883.87 m” web browser to access Indoor LoRa GW web page.
4.1.5 Connection to Indoor LoRa GW web UI