User Manual

Cisco Edge 300 Series Switch Installation Guide

OL-24909-01

Powering on the Switch

Connect the power cord to an electrical outlet. Press the Power button to power on the switch.

See Table 2 on page 5 for a description of the LED colors and their meanings.

Restoring the Factory Settings

Caution Resetting the switch deletes the existing configuration.

Step 1 Press and hold the Reset button for more than 5 seconds.

Step 2 Press and hold the Power button until the switch shuts down.

Step 3 Press the Power button to restart the switch.

Technical Specifications

Table 3 Cisco Edge 300 Series Switch Environmental and Physical Specifications

Environmental Ranges

Operating temperature 23 to 104°F (–5 to 40°C)

Storage temperature –13 to 158°F (–25 to 70°C)

Relative humidity Operating and nonoperating: 10 to 90% (noncondensing)

Operating altitude Up to 10,000 ft (3000 m)

Storage altitude Up to 15,000 ft (4570 m)

Physical Specifications

Weight (without bracket) 2.43 lb (1.1 kg)

Dimensions (H x W x D) 8.27 x 11.42 x 1.22 in. (21 x 29 x 3.1 cm)

Table 4 Regulatory Standards Compliance for the Cisco Edge 300 Series Switch

Specification Description

Safety IEC 60950-1

GB4943

CCC (China compulsory certification)

EMC China EMC Certifications

Bluetooth BQB

WIFI 802.11b/g/n Mark

Wireless SRRC