User Manual

11
Cisco Edge 300 Series Switch Installation Guide
OL-24909-01
Installing the Switch
Figure 7 Installing the Power Cord Retainer
Use the supplied cable tie and built-in cable clip to secure the cables to the bracket (see Figure 8).
Figure 8 Routing the Cables — Wall-Mount
Step 4
Determine where you want to mount the switch and its orientation. Make sure that the wall is smooth,
flat, dry, and sturdy. Make sure that the location is within reach of an electrical outlet.
Step 5 Mark the locations on the wall for the mounting screws. Make sure that the holes are the proper distance
apart, depending on the switch orientation.
255426
POWER
255427