User Manual

10
Cisco Edge 300 Series Switch Installation Guide
OL-24909-01
Installing the Switch
Step 1 Use the four M3.0 x 6-mm Phillips pan head screws to attach the wall-mount bracket to the bottom of
the switch (see Figure 6).
Figure 6 Attaching the Wall-Mount Bracket
Step 2
Connect all the cables that are necessary for your installation.
Step 3 Slide the power cord retainer along the power cord, and snap it into the chassis (see Figure 7).
1 M3.0 x 6mm Phillips pan head screws
330223
1