User's Manual
Table Of Contents
- Cisco Edge 340 Series Installation Guide
- About this Guide
- Cisco Edge 340 Series Accessories
- Overview of the Cisco Edge 340 Series
- Installing the Cisco Edge 340 Series
- Powering On the Cisco Edge 340 Series
- Resetting to Factory Mode
- Technical Specifications
- Regulatory Standards Compliance
- EMC Class B Notices, Warnings, and Safety Information
- Statement 2018-Class B Notice for FCC
- Statement 2022-Class B Notice for Canada
- Canadian Compliance for the Cisco Edge 340 Series
- Statement 295-Class B Warning for Korea
- Korea Application Statement
- Statement 157-VCCI Compliance for Class B Equipment
- Compliance Statement for Taiwan
- Compliance Statement for Device Working at 2.4 G and 5G in Brazil
- FCC Radiation Exposure Statement
- Declaration of Conformity for RF Exposure
- Obtaining Documentation and Submitting a Service Request
6
Cisco Edge 340 Series Installation Guide
OL-29523-01
Overview of the Cisco Edge 340 Series
LEDs
Figure 3 shows the LEDs on the front panel of the Cisco Edge 340 Series.
Figure 3 Cisco Edge 340 Series LEDs on the Front Panel
Table 2 shows the color and meaning of each LED.
1 Bluetooth
1
1. Only for the CS-E340W Series
3 WiFi
1
2 Storage status 4 Gigabit Ethernet uplink
Cisco Edge 340 Series
f
1 2 3 4
390141
Ta b l e 2LEDs
LED Color Meaning
Power
(behind
power
button)
Off There is no power.
Blinking blue System is in Power-on self test (POST) stage.
Blinking red System POST fails.
Blinking green System is in the factory mode.
Solid blue System is operating normally.
Solid red System is in the soft off mode.
Solid green System is in the sleep mode.