User's Manual

8
Chapter 3 Adapter Installation and Configuration – Windows ® 98 / 2000
3-1
SYSTEM REQUIREMENTS
In order to install and use the U58H004 MiniPCI WLAN card your PC system must meet the following requirements:
 A MiniPCI Type III slot
 MiniPCI revision 1.0 compliant card
 Windows 98 (with the Floppy, for use during installation)
 500 Kbytes free disk space for utility and driver installation
3-2 INSERTING THE ADAPTER
To insert the U58H004 Network Adapter into a notebook computer, do the following:
1. Locate an available Type III MiniPCI slot.
2. With the MiniPCI Adapter’s 124-pin goden finger facing the MiniPCI Slot and the “U58H004 MiniPCI” label
facing up slide the MiniPCI adapter completely into the MiniPCI slot.
Notebook with
AIR-MPI350-U58H00X
PCMCIA
slot
MiniPCI
slot
Notebook with
AIR-MPI350-U58H00X
Fig. 5.1 Insert the MiniPCI Adapter into Notebook Fig. 5.2 Insert the MiniPCI Adapter into Notebook
After properly inserting the Network Adapter into your notebook, continue with the U58H004 driver
and Lan-Express Configuration Utility installation.