User's Manual

1（）Answering Mode：This function can set the answering method.

 Normal Answer：Press answer key to answer the incoming call.

 Anykey Answer：Press any key except end key to answer the incoming call.

 Flip Answer：Open the flip to answer the incoming call.

2（）Auto Redial：If this function is activated, the phone will redial automatically after a delay

when it can’t reach the target phone.

3（）Incall Timer：Set whether you need to be noticed calling time during calling.

5.6.7. Security

1（）Enable PIN

 Activate：Need to input the PIN while power on.

 Cancel：Select this item not to activate.

2（）Change PIN: change PIN code.

3（）Change PIN2：This function needs SIM card support. For more information please contact

your service provider.

（4）Handset Code：Phone data will be protected by handset code. The default handset code is

“0000”. You can use this function to change it.

（5）Fixed Dialing：When this function is activate, only the set numbers can be called out. Users

can enter phonebook to edit the fixed dialing list. Select [Cancel] to close this function. This

function needs SIM card support. PIN2 is required to change the setting.

5.6.8. Restore Factory

Select this option to revert the initial status which manufacturer destined. Handset code is required.