User's Manual
Table Of Contents
- Cover
- Table of Contents
- List of Figures
- List of Tables
- 1 Introduction
- 2 Marvell Wireless Configuration Utility Overview
- 3 Marvell Wireless Configuration Utility User Interface
- 3.1 Network Status Tab
- 3.2 Profile Manager Tab
- 3.3 Site Survey Tab
- 3.4 Statistics Tab
- 3.5 Advanced Tab
- 3.6 AutoLink Tab
- 3.7 Admin Tab
- 3.8 About Tab
- A Compliance Statements
- B Acronyms and Abbreviations
- C Revision History
- Back Cover
Marvell Wireless Configuration Utility User Interface
AutoLink Tab
Copyright © 2007 Marvell CONFIDENTIAL Doc. No. MV-S800477-00 Rev. B
August 14, 2007, 2.00 Document Classification: Proprietary Information Page 61
3.6 AutoLink Tab
To enable AutoLink mode, proceed as follows:
1. Toggle the AutoLink button on the Access Point to enable AutoLink mode.
2. On the AutoLink tab, click AutoLink.
Within 60 seconds, the AutoLink will be completed.
Figure 50: Access Point AutoLink Button
Figure 51: AutoLink Tab