User's Manual
Table Of Contents
- Cover
- Table of Contents
- List of Figures
- List of Tables
- 1 Introduction
- 2 Marvell Wireless Configuration Utility Overview
- 3 Marvell Wireless Configuration Utility User Interface
- 3.1 Network Status Tab
- 3.2 Profile Manager Tab
- 3.3 Site Survey Tab
- 3.4 Statistics Tab
- 3.5 Advanced Tab
- 3.6 AutoLink Tab
- 3.7 Admin Tab
- 3.8 About Tab
- A Compliance Statements
- B Acronyms and Abbreviations
- C Revision History
- Back Cover
CB-85/MB-85/EC-85/MC-85
User Guide
Doc. No. MV-S800477-00 Rev. B CONFIDENTIAL Copyright © 2007 Marvell
Page 46 Document Classification: Proprietary Information August 14, 2007, 2.00
3.2.4.4 802.1X / WPA / WPA2 with LEAP
The definition of the LEAP authentication protocol for the authentication modes 802.1X, WPA, and
WPA2 is identical:
1. Select Light EAP (LEAP) as 802.1X Authentication Protocol.
2. Click Configure.
The LEAP Configuration window is displayed. For a detailed description of this window, see
Table 16 on page 48.
Table 15: Select Certificate Window Description (Server Certificates)
Area Description
Select Certificate Store Certificate stores with certificates to be used for server authentication:
• My Personal Certificates
Contains personal certificates (for client authentication only)
• Certification Authority Certificates
Contains certificates issued by a CA
• Root Certificates
Contains certificates issued by a CA who uses an own Trusted Root
CA certificate
• Software Publisher Certificates
Contains certificates issued by a software publisher
Certificates in Store Lists the certificates installed in the selected certificate store on the client
system
Figure 36: Security Tab—WPA2 with LEAP