User's Manual
Table Of Contents
- Cover
- Table of Contents
- List of Figures
- List of Tables
- 1 Introduction
- 2 Marvell Wireless Configuration Utility Overview
- 3 Marvell Wireless Configuration Utility User Interface
- 3.1 Network Status Tab
- 3.2 Profile Manager Tab
- 3.3 Site Survey Tab
- 3.4 Statistics Tab
- 3.5 Advanced Tab
- 3.6 AutoLink Tab
- 3.7 Admin Tab
- 3.8 About Tab
- A Compliance Statements
- B Acronyms and Abbreviations
- C Revision History
- Back Cover
Marvell Wireless Configuration Utility User Interface
Profile Manager Tab
Copyright © 2007 Marvell CONFIDENTIAL Doc. No. MV-S800477-00 Rev. B
August 14, 2007, 2.00 Document Classification: Proprietary Information Page 39
9. On the Select Certificate window, select the Certificate Store.
10. From the Certificates in Store list, click the certificate to be used for the server authentication.
11. Click Select to confirm your selection and to return to the Protected EAP (PEAP) window.
12. If you have selected Accept certificates from trusted server/domain, enter the server name
or the domain name into the Trusted Domain or Server box.
Figure 29: Select Certificate Window (Server Certificates)
Note
If the required certificate is not yet installed on your system or if you do not know which
certificate to use, contact your network administrator.