User's Manual
Table Of Contents
- Cover
- Table of Contents
- List of Figures
- List of Tables
- 1 Introduction
- 2 Marvell Wireless Configuration Utility Overview
- 3 Marvell Wireless Configuration Utility User Interface
- 3.1 Network Status Tab
- 3.2 Profile Manager Tab
- 3.3 Site Survey Tab
- 3.4 Statistics Tab
- 3.5 Advanced Tab
- 3.6 AutoLink Tab
- 3.7 Admin Tab
- 3.8 About Tab
- A Compliance Statements
- B Acronyms and Abbreviations
- C Revision History
- Back Cover
CB-85/MB-85/EC-85/MC-85
User Guide
Doc. No. MV-S800477-00 Rev. B CONFIDENTIAL Copyright © 2007 Marvell
Page 28 Document Classification: Proprietary Information August 14, 2007, 2.00
3.2.3.2 WPA-PSK / WPA2-PSK
The definition of the pre-shared key is identical for both WPA-PSK/WPA2-PSK with TKIP/AES:
1. Enter the pre-shared key into the Passphrase and Confirm boxes.
The passphrase must contain between 8 and 63 ASCII characters.
2. Click Save to set the configuration.
3.2.4 802.1X Authentication Modes
The Marvell Wireless Configuration Utility currently supports the following 802.1X authentication
modes:
802.1X—Open System with 802.1X Authentication (EAP/TLS, PEAP, EAP/TTLS, LEAP or
EAP-FAST)
WPA—WPA with 802.1X Authentication (EAP/TLS, PEAP, EAP/TTLS, LEAP or EAP-FAST)
WPA2—WPA2 with 802.1X Authentication (EAP/TLS, PEAP, EAP/TTLS, LEAP or EAP-FAST)
For all 802.1X authentication modes, CCX support can be enabled.
If 802.1X (Open System) is selected as Authentication Mode, WEP is pre-selected as Encryption
Method. If WPA or WPA2 is selected, TKIP and AES are available as Encryption Method. For details
on how to define the different 802.1X authentication protocols (EAP/TLS, PEAP, EAP/TTLS, LEAP,
and EAP-FAST), see the following subsections.
Figure 19: Security Tab—WPA2-PSK with TKIP