User's Manual
Table Of Contents
- Cover
- Table of Contents
- List of Figures
- List of Tables
- 1 Introduction
- 2 Marvell Wireless Configuration Utility Overview
- 3 Marvell Wireless Configuration Utility User Interface
- 3.1 Network Status Tab
- 3.2 Profile Manager Tab
- 3.3 Site Survey Tab
- 3.4 Statistics Tab
- 3.5 Advanced Tab
- 3.6 AutoLink Tab
- 3.7 Admin Tab
- 3.8 About Tab
- A Compliance Statements
- B Acronyms and Abbreviations
- C Revision History
- Back Cover
Marvell Wireless Configuration Utility User Interface
Profile Manager Tab
Copyright © 2007 Marvell CONFIDENTIAL Doc. No. MV-S800477-00 Rev. B
August 14, 2007, 2.00 Document Classification: Proprietary Information Page 23
The Network Info tab fields are as follows.
Figure 14: Network Info Tab (Ad-Hoc Network)
Table 4: Network Info Tab Description
Field Description
Profile Name Name of profile selected
Network SSID Network SSID label
Network Type
• Infrastructure
Connects to an existing Infrastructure network
• Ad-Hoc
Either connects to an existing Ad-Hoc network or initiates a new
Ad-Hoc network
Wireless Mode
• Auto
Connects to an 802.11a network, to an 802.11g network, or to an
802.11b network
• 802.11a
Connects to an 802.11a network only
• 802.11g
Connects either to an 802.11g network or to an 802.11b network
• 802.11b
Connects to an 802.11b network only
• 802.11n (2.4 GHz)
Connects to an 802.11n network with 2.4 GHz
• 802.11n (5 GHz)
Connects to an 802.11n network with 5 GHz
Preferred Channel Channel being used for an Ad-Hoc network initiated by the client card
The channel can be selected only at creation of a new profile (Ad-Hoc
network only).