User's Manual
Table Of Contents
- Cover
- Table of Contents
- List of Figures
- List of Tables
- 1 Introduction
- 2 Marvell Wireless Configuration Utility Overview
- 3 Marvell Wireless Configuration Utility User Interface
- 3.1 Network Status Tab
- 3.2 Profile Manager Tab
- 3.3 Site Survey Tab
- 3.4 Statistics Tab
- 3.5 Advanced Tab
- 3.6 AutoLink Tab
- 3.7 Admin Tab
- 3.8 About Tab
- A Compliance Statements
- B Acronyms and Abbreviations
- C Revision History
- Back Cover
CB-85/MB-85/EC-85/MC-85
User Guide
Doc. No. MV-S800477-00 Rev. B CONFIDENTIAL Copyright © 2007 Marvell
Page 42 Document Classification: Proprietary Information August 14, 2007, 2.00
The definition of the EAP/TTLS authentication protocol for the authentication modes 802.1X, WPA,
and WPA2 is identical:
1. Select EAP/Tunneled TLS (TTLS) as 802.1X Authentication Protocol.
2. Click Configure.
The EAP/Tunneled TLS (TTLS) window is displayed. For a detailed description of this window,
see Table 13 on page 45.
3. On the Client Authentication tab, enter your Anonymous Name, Login Name, Password,
and Domain.
The domain information is optional.
4. If you want to specify particular server certificates to be accepted (instead of accepting any
certificate sent by the server), click the Server Authentication tab. For a detailed description of
this window, see Table 14 on page 45.
Otherwise, continue with step 11.
Figure 32: EAP/TTLS Configuration Window—Client Authentication Tab