User Manual Part 1

CB-82/MB-82/EC-82/MC-82
User Guide
Doc. No. MV-S800473-00 Rev. B CONFIDENTIAL Copyright © 2007 Marvell
Page 46 Document Classification: Proprietary Information August 14, 2007, 2.00
3.2.4.4 802.1X / WPA / WPA2 with LEAP
The definition of the LEAP authentication protocol for the authentication modes 802.1X, WPA, and
WPA2 is identical:
1. Select Light EAP (LEAP) as 802.1X Authentication Protocol.
2. Click Configure.
The LEAP Configuration window is displayed. For a detailed description of this window, see
Table 16 on page 48.
Table 15: Select Certificate Window Description (Server Certificates)
Area Description
Select Certificate Store Certificate stores with certificates to be used for server authentication:
• My Personal Certificates
Contains personal certificates (for client authentication only)
• Certification Authority Certificates
Contains certificates issued by a CA
• Root Certificates
Contains certificates issued by a CA who uses an own Trusted Root
CA certificate
• Software Publisher Certificates
Contains certificates issued by a software publisher
Certificates in Store Lists the certificates installed in the selected certificate store on the client
system
Figure 36: Security Tab—WPA2 with LEAP