User Manual Part 1

CB-82/MB-82/EC-82/MC-82
User Guide
Doc. No. MV-S800473-00 Rev. B CONFIDENTIAL Copyright © 2007 Marvell
Page 40 Document Classification: Proprietary Information August 14, 2007, 2.00
13. Click OK to return to the Security tab of the Profile Settings.
14. If CCX compatibility is required, select the Enable Cisco Compatible Extensions (CCX) check
box.
15. Click Save to set the configuration.
Figure 30: Server Authentication—Trusted Domain or Server
Table 10: PEAP Configuration Window Description—Client Authentication Tab
Area/Field Description
Login Name Login name to the authentication server
Password Password for login to the authentication server
Domain Domain name for login to the authentication server (optional)
Inner EAP Protocols EAP protocol to be used for inner (client) authentication:
• EAP/MS-CHAP V2
Uses Microsoft Challenge Handshake Authentication Protocol
(CHAP) v2 for authentication
• EAP-GTC
Uses Generic Token Card (GTC) for authentication
Credentials to use for
inner EAP-GTC
Credentials to be used for inner (client) authentication:
• My Password
Uses a user-specific password
• Token information
Uses a token that generates a one-time password
Required, when EAP-GTC is selected as Inner EAP Protocol
Table 11: PEAP Configuration Window Description—Server Authentication Tab
Area/Button Description
Server Validation Method Certificates to be accepted for server authentication:
• Accept any server certificate
• Accept only trusted certificates
• Accept certificates from trusted server/domain
Trusted Certificates Lists the trusted certificates installed on the client system
Required, when Accept only trusted certificates or Accept certificates
from trusted server/domain is selected. The appropriate root certificate
of the server/domain must also be installed on the client system.
View Shows the selected certificate
Remove Deletes the selected certificate from the Trusted Certificates list