User Manual Part 1

Marvell Wireless Configuration Utility User Interface

Profile Manager Tab

August 14, 2007, 2.00 Document Classification: Proprietary Information Page 25

3.2.3 Legacy Authentication Modes

The Marvell Wireless Configuration Utility currently supports the following legacy authentication

modes:

 Open System—Open Authentication (no key or a pre-shared WEP key is required)

 Shared Key—Shared Authentication (a pre-shared WEP key is required)

 Auto Switch—Auto Select Authentication modes (no key or a pre-shared WEP key is required)

 WPA-PSK—WPA Pre-Shared Key

 WPA2-PSK—WPA2 Pre-Shared Key

If Open System or Auto Switch is selected as Authentication Mode, Security off and WEP are

available as Encryption Method. If Shared Key is selected as Authentication Mode, WEP is

pre-selected as Encryption Method. For details on how to configure the WEP key(s), see

Section 3.2.3.1.

If WPA-PSK or WPA2-PSK is selected as Authentication Mode, AES and TKIP are available as

Encryption Method. For details on how to define the pre-shared key, see Section 3.2.3.2.

Note

The authentication modes available depend on the network type selected on the

Network Info tab.

For Ad-Hoc networks, only Open System and Shared Key are available.

Note

The authentication modes available depend on the network type selected on the

Network Info tab.

For Ad-Hoc networks, only authentication modes without encryption or with WEP key

are available.