User Manual Part 1

Marvell Wireless Configuration Utility User Interface

Profile Manager Tab

August 14, 2007, 2.00 Document Classification: Proprietary Information Page 21

3.2 Profile Manager Tab

The Profile Manager tab displays the profiles available and allows you to create, modify, and delete

profiles.

Profile Manager—Profile List

The section on the left side of this tab lists all of the profiles available. Highlighting a profile selects it.

If the check box next to the profile is selected, that profile is used in auto-configuration mode when

the link is lost. If it is not selected, that profile is excluded in auto-configuration. The buttons

associated with this window are as follows.

Figure 12: Profile Manager Tab

Table 3: Profile List Section Description

Button Description

Apply Profile Applies the profile selected.

Apply the profile by double-clicking the desired profile.

Move Up/Down Moves the profile up and down in the list.

All profiles with the Network Type set to Infrastructure are displayed before the

profiles with the Network Type set to Ad-Hoc. In auto-configuration mode, the

selected profiles at the top of the list have higher priority than selected profiles at

the bottom of the list.