User Manual Part 1

CB-82/MB-82/EC-82/MC-82
User Guide
Doc. No. MV-S800473-00 Rev. B CONFIDENTIAL Copyright © 2007 Marvell
Page 18 Document Classification: Proprietary Information August 14, 2007, 2.00
3.1.3 Signal Strength / Wireless Mode Indicator
The color-coded Signal Strength bar displays the signal strength of the last packet received by the
client card.
Signal strength is reported as a percentage. A signal in the red indicates a bad connection. A signal
in the green indicates a good connection.
The Wireless Mode indicator shows the data rates the client card operates. There are two modes:
 802.11b
 802.11g (backward compatible to 802.11b)
3.1.4 Internet Protocol (TCP/IP)
This section specifies the IP configuration of the client station when it is connected.
Security Reports the type and level of security set. The security level is set through the
Profile Setting of the Profile Manager tab. Configure security settings also
through the Site Survey tab when connecting to a network.
Tx/Rx Rates Current Tx Rate and Rx Rate of the channel being monitored.
Table 1: Link Information Section Description (Continued)
Field Description
Figure 7: Signal Strength Bar
g means connected to an 802.11g capable AP
b means connected to an 802.11b capable AP
Figure 8: Internet Protocol Section