User Manual Part 1

Marvell Wireless Configuration Utility Overview

Overview

August 14, 2007, 2.00 Document Classification: Proprietary Information Page 11

2 Marvell Wireless Configuration Utility

Overview

2.1 Overview

The Marvell Wireless Client Card Configuration Utility is a Windows

based application that allows

configuration and management of the Marvell high throughput client cards. The Marvell Wireless

Configuration Utility sets up profiles and performs other wireless network management tasks. For

information on installing the Marvell Wireless Configuration Utility see the Installation Guide.

2.2 Marvell Wireless Configuration Utility

Once installed, the Marvell Wireless Configuration Utility is accessed from the Start menu or from

the Desktop.

Start menu:

 Start > Marvell Wireless Configuration Utility

 Start > Programs > Marvell > Marvell Wireless Configuration Utility

Desktop:

 Double-click the Marvell Wireless Configuration Utility icon.

2.2.1 Windows XP and Windows Server 2003 Users

For Windows XP and Windows Server 2003, either the Windows Wireless Zero Configuration

Service or the Marvell Wireless Configuration Utility can be used to configure the Marvell client card.

For further information on the Windows Wireless Configuration Service, refer to the Windows

documentation.

Disabling Windows Wireless Zero Configuration Service

To disable the Windows Wireless Zero Configuration Service:

1. Start the Marvell Wireless Configuration Utility.

2. Click the Admin tab.

Figure 1: Marvell Wireless Configuration Utility Icon

Note

When using the Marvell Wireless Configuration Utility, Marvell recommends turning off

the Windows Wireless Zero Configuration Service, which is enabled by default. Both

utilities should not be used at the same time.