Instructions / Assembly

4.2 OPTIONAL HANGER BRACKETS
11.4" - 11.8"
Wall
Waste
Outlet
Floor
Wall Mounting Brackets
Determine the desired height. Sink should be installed between 31 in. and 34 in. from the top of the
sinks lip to the floor. The center of the slots on the steel hangers should be 11.4-in to 11.8-in apart,
and should sit on the back of the sinks base. Mark thesemeasurements with a pencil, using a level to
draw a plumb line for the screws. Hold thesteel hangers level and mark the locations of the holes on
the walls. Check to be sure themarks are level. Mount the steel hangers to the wall with two short
screws (not included). Check to see that it is level before fully tightening into position.
With help from another person, place sink onto the steel hanger. Place a level across sink and check
that it is plumb. Adjust as necessary
Wall Mounting
Brackets
Ceramic Sink
Assembly Instructions
Fireclay Wall Mount Sink
[e-mail]
361-315-7198
- 5 -