Installation Guide

Insert the drain body and washer A into the drain hole.

Connect the drain body to the trap.

Install the tapered washer B and lock nut(D) from underneath

the sink. Tighten the nut on the drain body.

Insert the stopper(C) into the drain hole in the sink. Press down



Make your home luxury.

STEP 5: INSERT THE DRAIN BODY STEP 6: INSTALL THE DRAIN KIT

STEP 7: CONNECT THE TRAP

STEP 8: CONNECT WATERLINES

STEP 9: CHECK FOR LEAKS



CARE & MAINTENANCE:







3.Do not use cloth with a coarse surface

4.Unscrew the aerator and clean when necessary

Connect waterlines to the hot and cold copper lines. Connect

waterlines to angle stops.

Apply pipe tape to avoid leakage. Tighten both ends of water-



and check for leaks.

Washer A

C: Pop up stopper

Washer A

D: Lock nut

Washer B