User Manual

IMPORTANT SAFEGUARDS
WARNING: This unit contains electrical connections and moving parts that potentially present risk to
the user. To avoid the risk of serious injury when using your blender. basic safety precautions should be
followed, including but not limited to following:
READ ALL INSTRUCTIONS, SAFEGUARDS, AND WARNINGS BEFORE OPERATING BLENDER.
The failure to follow any of the important safeguards and instructions for safe use is a misuse of your
blender, which can create the risk of serious injure and void your warranty.
1. Read all instructions.
2. Carefully observe and follow all warnings and instructions.
3. Take your time and exercise care during unpacking and appliance setup. This appliance contains
sharp blades that can cause injury if mishandled.
4. Take inventory of all contents to ensure that you have all parts needed to properly and safely
operate your appliance.
5. This appliance is not intended for use by persons (including children) with reduced physical, sensory,
or mental capabilities, or lack of experience and knowledge, unless they are closed supervised and
instructed concerning use of the appliance by a person responsible for their safety. Close supervision is
necessary when any appliance is used by or near children. Children should be supervised to ensure that
they do not play with the appliance.
6. Do not allow children to operate this appliance or use as a toy. Close supervision is necessary when
any appliance is used near children.
7. To protect against the risk of electric shock, DO NOT submerge the appliance or allow the power
cord to contact any form of liquid.
8. Turn the appliance OFF, then unplug from the outlet when not in use, before assembling or
disassem-bling parts and before cleaning. To unplug, grasp the plug and pull from the out let. Never pull
from the power cord.
9. To avoid a hazard due to inadvertent resetting of the thermal cut-out, power to this blender must not
be supplied through an external switching device, such as a timer, or connected to a circuit that is
regularly switched on and off by the utility.
10. Do not operate any blender with a damaged cord or plug or after the blender malfunctions, or is
dropped or damaged in any manner. Email [e-mail] at once for information on examina-
tion, repair, or adjustment.
11. GFI circuit breakers might be installed in your kitchen. Look for them in outlets near sinks. If the
blender won’t operate, unplug the blender. Reset the wall outlet or circuit breaker. If the circuit breaker
continues to trip, unplug the blender from the outlet. Allow the blender to sit for 24 hours before attempting
to use it again. Contact Customer Service if the problem persists.
12. This appliance has a polarized plug (one prong is wider than the other). To reduce the risk of electric shock,
this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it
still does not fit, contact a qualified electrician. DO NOT modify the plug in any way.
13. This appliance has important information on the plug prong. The power cord is not suitable for
replacement. If damaged, contact homgeek for servicing in order to avoid a hazard.
14. Before use, wash all parts that may come into contact with food. Follow washing instructions covered
in this instruction manual.
15. ALWAYS use the appliance on a dry and level and firm surface. Never operate the appliance on
soft surfaces.
- 02 -