Manualshelf

User Manual

ManualsBrandsHomgeek ManualsBlenders1450-Watt Professional Blender with 70 Oz Tritan Pitcher, High Speed Countertop Blender with 4 Blending Preset Programs and 8 Adjustable Speeds Control, Multifunctional Blender for Smoothie, Milkshake
10111213141516171819
* If ingredients are not blending properly, use a tamper to help push ingredients towards blades. If this
does not work, press On/Off to Off position to power off. Remove the container from the blender base
and use a rubber spatula to press the air bubble away from the blades. Add liquid if necessary.
Replace the lid and lid plug. Replace container to the motor base and continue blending.
9. When blending is complete, turn off and unplug the appliance. Wait for the blades to completely stop
spinning.
CAUTION: Make sure that the motor base is unplugged when not in use.
10. To remove the container from motor base, lift it off the motor base.
WARNING: Be sure to wait for the unit to come to a complete stop before removing the container from
the base or the lid from the container.
11. To remove the lid, lift up on one lid flap while holding the container securely. The container can then
be emptied. If hot ingredients were blended, carefully hold the container handle, then place the container
on a flat surface.
CAUTION
Moving Parts May
Become Hot with
Extended Use.
DO NOT touch.
FAQ
1. How to crush ice?
homgeek Blender can crush ice cubes into sorbet.
To achieve the best results, the ice must be dried instead of watery or melting. The container should
be dry. Tamper is also needed.
1. Place ice into the container (no more than 1/3 of the way full).
2. Securely lock the lid to the container, and remove the lid plug.
3. Turn on the blender and select "ICE CRUSH" program.
4. Use tamper to push ice down into the blades.
5. The program will stop automatically when finished. You can also manually stop blending before the
ice starts melting.
6. Unplug and remove the ice by turning the container upside down. Use a plastic spatula and carefully
shift ice stuck underneath the blades.
Note:
If dry ice is not available, you can crush 1 ice: 1 water.
2. How to determine the tamper is suitable for your blender?
Remove the lid plug and insert the tamper through the lid plug opening. The tamper should fit easily into
the opening. It should not come into contact with the blades no matter where you move the tamper inside
the container.
- 13 -