User Manual

USING VARIABLE SPEED DIAL
1. Make sure the marker on Variable Speed dial is at “0” position.
2. Push the On/Off Switch up to On position, then slowly increase to the desired speed between 1 and
8 during the blending cycle.
3. During blending, you can push the High/Variable Switch up to High position for the highest speed
of blending and turn it back to Variable position for using Variable Speed Dial again.
4. To stop blending, turn the marker on Variable Speed Dial to “0” and blender will enter standby mode.
Push the On/Off Switch down to Off and blender will power off.
Note:
Make sure that the marker on Variable Speed Dial is pointed to “0” after each use.
USING 4 SMART PROGRAMS
The speed and time for these programs are set by default. These programs have pauses or changes
in speed throughout the cycle.
a. Make sure the High/Variable Switch is at Variable position and the marker on Variable Speed Dial is
pointing to “0”. Pushing the On/Off Switch up to On and blender will enter standby mode. On will appear
on the LCD Display Screen.
b. Simply press one of the 4 programs key. It will automatically start blending under selected program.
Number “0” in orange color on LCD Display Screen will be running quickly during blending. Countdown
time number in white color will be displayed on LCD screen.
c. The High function can be used when a program is selected. Pushing down the High/Variable Switch
to High position when a program is selected will cause the machine to run at the highest speed available.
The timer will continue counting down under High mode. Returned to Variable position and blender will
continue to work under the selected program.
d. The program will automatically stop after it’s completed. Alternatively, you can press the currently-
run-ning program button again to stop the program and blender will enter standby mode. Or simply turn
the On/Off switch to Off and blender will power off.
Tips:
How to switch among each smart program during blending?
Method:
During blending, simply press another desired program key. The newly-selected program indicator light
will be on, indicating its selection. Blender will be switched to immediately blending under the newly-se-
lected program upon its selection.
How to use smart programs when using Variable Speed Dial?
Method:
Simply press the desired program key directly. The newly-selected program indicator light will be on
and will auto-start blend at once.
How to use Variable Speed Dial when using smart program?
Method:
Simply turn the marker on Variable Speed Dial at least one speed range, it will auto-start blending
under set speed at once.
- 12 -